Home / Vertical Lift Stages / CYZS40-0601-6-28
Photograph of the unit goes here
Vertical lift stage
CYZS40-0601-6-28
Z-axis lift tables and scissor lifts, from 6 mm bench travel to 200 kg platforms. Table 40×40 mm.
Travel6mm
Table40×40mm
Repeatability± 3µm
Accuracy10µm
Load3kg
A dimensioned 2D drawing and the 12-pin connector pinout exist for this model and will be published here. STEP files are being prepared.
Specifications
and how each figure is established| Parameter | Value | Unit | Basis |
|---|---|---|---|
| Identity | |||
| Series | Vertical Lift Stages | — | Catalogue |
| Actuation | 28 stepper | — | Catalogue |
| Mass | 0.5 | kg | Catalogue |
| Geometry and travel | |||
| Table size | 40×40 | mm | Catalogue |
| Total travel | 6 | mm | Catalogue |
| Ball screw | φ6 lead 1 | — | Catalogue |
| Guideway | Linear ball | — | Catalogue |
| Body material | Stainless steel | — | Catalogue |
| Performance | |||
| Unidirectional positioning accuracy | 10 | µm | Catalogue |
| Repeatability | ± 3 | µm | Catalogue |
| Maximum speed | 10 | mm/s | Catalogue |
| Parallelism | 30 | µm | Catalogue |
| Motion parallelism | 10 | µm | Catalogue |
| Straightness | 20 | µm | Catalogue |
| Payload | 3 | kg | Catalogue |
| Asked for on every export inquiry | |||
| Bidirectional repeatability | — | µm | Not confirmed |
| Measurement standard | — | — | Not confirmed |
| Test temperature | — | °C | Not confirmed |
| Load condition during test | — | — | Not confirmed |
| Vertical and moment load limit | — | N·m | Not confirmed |
| Motor holding torque | — | N·m | Not confirmed |
Catalogue — published shipping specification Derived — computed from the catalogue, notation normalised Not confirmed — absent from the catalogue, ask engineering
What a quoted unit includes
supply scope| Item | Included | Detail |
|---|---|---|
| Stage body | Always | Linear ball guideway, φ6 lead 1, hard stops, no sensors fitted |
| Motor | Fitted | 28 stepper — the catalogue quotes this model with the motor mounted |
| Drive / amplifier | Not supplied | The step drive is the customer’s; we confirm the wiring |
| Controller | Not supplied | We do not resell controllers |
| Cable set | Option | 12-pin connector, pinout published on the datasheet. Length to confirm |
| Sample program | Not confirmed | Ask whether homing examples exist for this series |
| Mounting hardware | Quoted separately | Adapter plates are priced per application |
This is the first question on most inquiries. Answering it here removes an email round trip from every quotation.