Home / Goniometer Stages / CYDAV80-50-42
Photograph of the unit goes here
Goniometer stage
CYDAV80-50-42
Arc swing about a rotation centre above the table, for tilt alignment without translating the part. Table 80×80 mm.
Arc± 7.5°
Centre height50±0.2mm
Repeatability± 0.002°
Load7kg
A dimensioned 2D drawing and the 12-pin connector pinout exist for this model and will be published here. STEP files are being prepared.
Specifications
and how each figure is established| Parameter | Value | Unit | Basis |
|---|---|---|---|
| Identity | |||
| Series | Goniometer Stages | — | Catalogue |
| Actuation | — | Catalogue | |
| Geometry | |||
| Table size | 80×80 | mm | Catalogue |
| Stage height | 25±0.2 | mm | Catalogue |
| Rotation centre height | 50±0.2 | mm | Catalogue |
| Performance | |||
| Total arc | 15 (± 7.5) | ° | Derived |
| Maximum speed | 10.5 | °/s | Catalogue |
| Repeatability | ± 0.002 | ° | Catalogue |
| Backlash | 0.003 | ° | Catalogue |
| Payload | 7 | kg | Catalogue |
| Asked for on every export inquiry | |||
| Bidirectional repeatability | — | µm | Not confirmed |
| Measurement standard | — | — | Not confirmed |
| Test temperature | — | °C | Not confirmed |
| Load condition during test | — | — | Not confirmed |
| Vertical and moment load limit | — | N·m | Not confirmed |
| Motor holding torque | — | N·m | Not confirmed |
Catalogue — published shipping specification Derived — computed from the catalogue, notation normalised Not confirmed — absent from the catalogue, ask engineering
What a quoted unit includes
supply scope| Item | Included | Detail |
|---|---|---|
| Stage body | Always | Crossed roller guideway, drive, hard stops, no sensors fitted |
| Motor | Fitted | undefined — the catalogue quotes this model with the motor mounted |
| Drive / amplifier | Not supplied | The step drive is the customer’s; we confirm the wiring |
| Controller | Not supplied | We do not resell controllers |
| Cable set | Option | 12-pin connector, pinout published on the datasheet. Length to confirm |
| Sample program | Not confirmed | Ask whether homing examples exist for this series |
| Mounting hardware | Quoted separately | Adapter plates are priced per application |
This is the first question on most inquiries. Answering it here removes an email round trip from every quotation.