Home / Hollow Rotary Tables / CK60F-10
Photograph of the unit goes here
Hollow rotary stage
CK60F-10
Through-hole cam indexing tables, ±5 arc-sec repeatability, 137 to 2500 N·m tilt moment.
Rated torque6.5N·m
Repeatability± 5arc-sec
Tilt moment137N·m
Mass0.55kg
A dimensioned 2D drawing and the 12-pin connector pinout exist for this model and will be published here. STEP files are being prepared.
Specifications
and how each figure is established| Parameter | Value | Unit | Basis |
|---|---|---|---|
| Identity | |||
| Series | Hollow Rotary Tables | — | Catalogue |
| Actuation | — | Catalogue | |
| Mass | 0.55 | kg | Catalogue |
| Load capacity | |||
| Maximum tilt moment | 137 | N·m | Catalogue |
| Maximum radial force | 1930 | N | Catalogue |
| Maximum axial force | 1930 | N | Catalogue |
| Rated torque | 6.5 | N·m | Catalogue |
| Permissible inertia torque | 13 | N·m | Catalogue |
| Accuracy | |||
| Indexing accuracy | ± 0.5 | arc-min | Catalogue |
| Repeatability | ± 5 | arc-sec | Catalogue |
| Table face runout | ± 0.005 | mm | Catalogue |
| Table radial runout | ± 0.005 | mm | Catalogue |
| Speed | |||
| Rated output speed | 200 | rpm | Catalogue |
| Maximum output speed | 500 | rpm | Catalogue |
| Asked for on every export inquiry | |||
| Bidirectional repeatability | — | µm | Not confirmed |
| Measurement standard | — | — | Not confirmed |
| Test temperature | — | °C | Not confirmed |
| Load condition during test | — | — | Not confirmed |
| Vertical and moment load limit | — | N·m | Not confirmed |
| Motor holding torque | — | N·m | Not confirmed |
Catalogue — published shipping specification Derived — computed from the catalogue, notation normalised Not confirmed — absent from the catalogue, ask engineering
What a quoted unit includes
supply scope| Item | Included | Detail |
|---|---|---|
| Stage body | Always | Cam indexer guideway, drive, hard stops, no sensors fitted |
| Motor | Fitted | undefined — the catalogue quotes this model with the motor mounted |
| Drive / amplifier | Not supplied | The step drive is the customer’s; we confirm the wiring |
| Controller | Not supplied | We do not resell controllers |
| Cable set | Option | — |
| Sample program | Not confirmed | Ask whether homing examples exist for this series |
| Mounting hardware | Quoted separately | Adapter plates are priced per application |
This is the first question on most inquiries. Answering it here removes an email round trip from every quotation.